| Power Mode | |
| Max. Average Power | 100 W |
| Nominal Sensitivity | 0.2 mV/W |
| Min. Power | 200 mW |
| Power Resolution | 10 mW (a) |
| Noise Equivalent Power (NEP) | 10 mW (a) |
| Response Time (0-90%) | 3 sec (b) |
| Power Calibration Uncertainty | ± 3% |
| Power Linearity (1) | ± 1.5% |
| Absorber Specs | |
| Aperture | 30 mm |
| Type | HPB |
| Absorber Spectral Range | 0.19 - 11 µm |
| Calibration Spectral Range | 0.19 - 2.1 µm, 2.94µm, 9 - 11 µm |
| Max Power Density (2) | 4 kW/cm² @50 W |
| Max Energy Density (2) | 5ms pulse width: 36 J/cm² 10µs pulse width: 1.2 J/cm² 10ns pulse width: 0.3 J/cm² |
| General Characteristics | |
| Cooling | Forced Air (c) |
| Weight | 0.3 kg |
| Dimension | 60 x 60 x 67 mm |
| Cable length - connector | 1.5 m – Bare wire (d) 2.5 m – USB (U option) 1.5 m - RS232 (R option) |
| Notes | |
| (1). Detector centrally irradiated @50% of useful surface. (2). Damage thresholds also depend on power level. Please see damage graphs for more details. | (a). Using LaserPoint Plus 2 electronics (b). Accelerated with LaserPoint electronics (c). 12V DC Fan. Power supply not included. (d). Available, on request, with DB15 connector. |
Configurer les options
Lire termes et conditions